|
Components
News - Product Releases
RoHS Compliance
|
|
Product Releases
|
|
 High
Power , Surface Mount, RF Terminators
Available as of
November 2007
THP series
click here
High frequency
operation up to 3 GHz
Up to 250W dissipation on Aluminum Nitride substrate
Long life, temperature stable thin film technology
The THP series is
a leadless high power chip termination solution. Operation to 3 GHz is
available through the use of a rugged thin film element providing
performance stability over time and temperature. A selection of four
termination configurations allow maximum versatility for different
circuit designs and construction. An aluminum nitride substrate provides
the high thermal conductivity for power dissipation ratings from 5 watts
to 250 watts. Applications include satellite communications,
isolator/circulators, cell base stations and high power microwave/RF
power amplifiers.
|
Surface Mount RF Power Attenuator
Available as of
October 2007
ATP series
click here
1/4W, 1/2W, 1.0W, 30W, 100W, 120W, and 150W power rating
0.1dB ~ 10dB, 20dB, 30dB, and 40dB
1.5GHz-30W and
4GHz-1/4W surface mount small size attenuators of 50ohm characteristic
impedance.
ATP68, 1.5GHz-30W (attach to heart sink directly) small size power
attenuator, Beryllium free configuration, ATP68 has durable power
consumption in power isolators and circulators. 3GHz-100-150W surface
mount small size attenuators of 50ohm characteristic impedance.
ATP53S and ATP54D 4GHz-1/4W power and high durability against pulse /
EMI accidents in small signal applications. Face down
configuration on strip line show better return loss characteristics.
Long life and temperature stability of thin film technology realize
better performance at a temperature range from –55C to +155C.
Applications include gain control circuits, isolation circuits of power
boost amplifiers at GHz, loss compensation of transmission line of data
communication systems, detecting signal control of ATE-LSI test
system-circuit board functional test systems, industrial measurement
electronics, medical scientific electronics and miscellaneous
communication systems.
|
Current Shunt Resistor (Ammeter Shunt)
Available as of
October 2007
SR
series Specification
click here
These are low
resistance precision resistors used to measure AC or DC electrical
currents by the voltage drop those currents create across the
resistance; it is a type of current sensor. Available with 2 or 4
ports. Tight Tolerance of 1% and Tight TCR of 100ppm. Available from
100 Amps to 2,000 Amps.
|
|
Flanged RF Power Terminator (Resistor)
Available as of
October 2007
FRFPT
series Specification
click here
This flanged RF power terminator (resistor) features
frequency performance
characterized to 3GHz, flanged heatsink and thermally conductive ceramic
substrate enables power dissipation up to 250W, and thin film
technology provides stability over time and temperature.
|
|
Thermal Converter
(Thin-Film
Planar Multijunction Thermal Converters)
Available as of
October 2007
MJTC
series Specification
click here
This
multi-junction thermal converter device is for high-precision AC-DC
transfer standards. Provides high sensitivity of 10-6 to 10-7 for
comparing rms power between ac and dc input voltages. Frequency
characteristic better than 0.001% in the frequency range of 10 Hz to 100
kHz, and better than 0.01% at 100kHz to 1 MHz.
|
|
High
Frequency Thermal Voltage Converter
Available as of October 2007
TVC
series Specification
click here
This is a
complete thermal converter module using the MJTC thermal converter as a
core device. Dedicated high-frequency chassis with input and output
connectors. Evaluation of frequency characteristic of the ac-dc
transfer difference possible at 10-6 level up to 1MHz.
|
01005 Thick Film Chip Resistors
Available as of
September 2007
CR00 series Thick Film 01005 Specification
click here
CJ00 series Thick Film 01005 Jumper
The 01005 passive is yet an even smaller size option now being
offered. The smaller size, 01005, should behave more sensitively
to process and design variables. RoHS compliant, the new 01005 1/32W
chip resistor comes in resistance ranging from 10R to 1M (jumper
inclusive). Main applications of the 01005 chip resistors include PoP
(Package on Package) high density PCBA, mobile phone RF modules, micro
drives and handheld memory product (such as SD cards).
|
Planar Thick
Film Chip Resistors - Gold Terminals
Planar Thin Film Precision Resistors - Gold Terminations
Available as of
September 2006
CRG*A series Thick Film Specification
click here
CTG*A series Thin Film Specification
click here
CTG*A and CRG*A series
is constructed with Au Terminations, Flat, Single Sided Type for Gold
Wire Bonding to the top of the terminal used in hybrid and printed
circuit applications |
|
|
|
Thin Film Chip Fuse
Now Available 
Product Details
TFC Series - These thin film flat chip fuses offer
quick-acting fuse characteristics, with a rated current value up to 5.0
A and stability rated in accordance with
UL 248-14. The TFC product is rated for a current range of 0.5 A to 5 A.
In 0603 case size, the devices provide a breaking capacity of 50 A
(50V, 32V, or 24V) and in 0402 case size, the device provides a breaking
capacity of 35A (24V).
|
|
NTC Thermistors
Now Available
Product Details
NTC
Series - AAC has added
thermistor components to its
surface mount passive
component line, with its new negative temperature coefficient (NTC)
Thermistor. The NTC Thermistor features standard values, 1.0K ohm to
100K ohm in 0402 and 0603 case sizes. The AAC NTC Thermistor
provides a versatile solution for temperature measurement,
control, and compensation applications in a broad range of end products.
|
 Thick
Film Chip Resistors - SnPb Terminals
Available as of
April 2006
Click here
for the specification
CRT Series - AAC has extended is production of SnPb terminations for
its surface mount chip resistors in sizes 0201, 0402, 0603, 0805, 1206,
1210, 2010, and 2512. Considering that several applications are exempted
under RoHS, or have delayed deadlines, AAC will release its CRT series
back into the market in Spring 2006.
Some of these applications include lead in solders for servers, storage,
and storage array systems; lead in solders for network infrastructure
equipment for switching, signaling, and transmission, as well as network
management for telecommunication; and lead in electronic ceramic parts
(e.g. piezoelectronic devices). In addition, aerospace and defense
applications are exempt and will continue to use SnPb assemblies .
|
|
Electric
Double Layer Gold Capacitors
Available
as of July 2006
Product Details
GC Series - Electric Double Layered Capacitors, known as “Gold
Capacitors”, offer the highest volumetric efficiency of all capacitor
technologies. It is often compared to a secondary battery. Unlike
batteries, the Gold Capacitor does not rely on a chemical reaction to
produce electric current rather it is a storage cell that utilizes the
absorption/release reaction of ions.
Gold Capacitor has no limit to the number of charge and discharge cycles
it can sustain, and does not need a charging circuit. Repeated rapid
charge and discharge cycles are also acceptable.
The GC-EN series, SMD Coin type, allows for re-flow soldering peak
temperatures up to 240°C. With its miniature size (6.8mm diameter) and
four different terminal styles, this capacitor is ideal for small
handheld or portable devices.
|
|
   
Specialty Polymer Aluminum Electrolytic Capacitors
Available
as of July 2006
Product Details
SPC Series - The
main application for the Specialty Polymer Aluminum Electrolytic
Capacitor is for noise filtering in digital home electronic products.
This component is unique, not only for its great noise canceling
characteristics, but also for the voltage stability.
The structure is composed of Aluminum terminal filters covered many
times by polymer molecules. By the special structural characteristic of
having the element parallel connected, the resistance value become
extremely low, and as a result the capacitor cancels the noise at even
high frequencies, ranging from 30M-1GHz. At the same time,
the voltage becomes quite stable, allowing for the high frequency noise
to also become lower.
|
|
SPC SERIES PRODUCT OVERVIEW |
|
Series |
Type |
Features |
Temp. Range |
Endurance |
Max
Oper. Voltage |
Capacitance
(mF) |
|
SPC-FD |
Surface Mount |
Low
ESR
1.2mm max height |
-40°C
~ +105°C |
1000 h |
2 ~
12.5V |
15 ~
68 |
|
SPC-CD |
Surface Mount |
Low
ESR
1.9mm max height |
-40°C
~ +105°C |
1000 h |
2 ~
16V |
2.2 ~
150 |
|
SPC-UD |
Surface Mount |
Low
ESR
3.0mm max height |
-40°C
~ +105°C |
1000 h |
2 ~ 8V |
68 ~
330 |
|
SPC-UE |
Surface Mount |
Low
ESR
4.3mm max height |
-40°C
~ +105°C |
1000 h |
2 ~ 8V |
100 ~
470 |
|
SPC-S |
Surface Mount |
Low
ESR
Max Cap of 560mF |
-40°C
~ +105°C |
1000 h |
2 ~
6.3V |
56 ~
560 |
|
SPC-H |
Surface Mount |
Wide Temp Range |
-40°C
~ +125°C |
1000 h |
2 ~ 8V |
33 ~
330 |
|
.
